浙江大學機械工程學系導師：吳進明 正文

　　姓名：吳進明
　　性別：男
　　所在學院：材料科學與工程學系
　　職稱：教授

　　個人簡介
　　吳進明，男，教授。1999年3月博士畢業后留校任教至今。2002年12月晉升副教授，2010年12月晉升教授。期間于2000年7月至2002年7月赴日本岡山大學從事博士后研究，2005年3月至9月在香港大學以Research Associate身份進行生物材料方面合作研究，2006年7月至2007年6月獲德國洪堡獎學金，在馬普學會膠體與界面研究所（波茨坦）從事有序介孔薄膜研究。
　　迄今在國內外專業期刊發表論文80余篇，其中被SCI收錄的論文70余篇，論文SCI引用860余次( http://www．researcherid．com/rid/B-4124-2009)。
　　負責或參加多項國家自然科學基金及省自然科學基金項目。

　　研究方向：光催化污水處理、生物材料、金屬基復合材料。

　　發表論文：
　　1．Tang, M．Z．, Wu, J．M．* (2009): Photoelectrocatalytic Efficiency of Low-Temperature Precipitated Monolayer Rutile TiO2 Nanoflower Film, Science of Advanced Materials 1, 144-52．
　　2．Wu, J．M．*, Xue, H．(2009): Photocatalytic Active Titania Nanowire Arrays on Ti Substrates, Journal of the American Ceramic Society 92, 2139-43．
　　3．Song, X．M．, Wu, J．M．*, Zhang, G．J．, Yan, M．(2009): A Dual-Layer Titania Film with Enhanced Photocatalytic Activity, The Journal of Physical Chemistry C 113, 10681-88．
　　4．Song, X．M．, Wu, J．M．*, Yan, M．(2009): Photocatalytic Degradation of Selected Dyes by Titania Thin Films with Various Nanostructures, Thin Solid Films 517, 4341-47．
　　5．Song, X．M．, Wu, J．M．*, Tang, M．Z．, Qi, B．, Yan, M．(2008): Enhanced Photoelectrochemical Response of a Composite Titania Thin Film with Single-Crystalline Rutile Nanorods Embedded in Anatase Aggregates, The Journal of Physical Chemistry C 112, 19484-92．
　　6．Wu, J．M．*, Qi, B．(2008): Low-temperature Growth of Rutile Nanorod Thin Films and Their Photon-induced Property, Journal of the American Ceramic Society 91, 3961-70．
　　7．Song, X．M．, Wu, J．M．*, Yan, M．(2008): Photocatalytic and photoelectrocatalytic degradation of aqueous Rhodamine B by low-temperature deposited anatase thin films, Materials Chemistry and Physics 112, 510-515．
　　8．Wu, J．M．, Antonietti, M．, Gross, S．, Bauer, M．, Smarsly, B．(2007): Ordered mesoporous thin films of rutile TiO2 nanocrystals mixed with amorphous Ta2O5．ChemPhysChem 9, 748-57．
　　9．Ying, H．G．, Yan, M．, Ma, T．Y．, Wu, J．M．, Yu, L．Q．(2007): Effects of NH4F on the deposition rate and buffering capability of electroless Ni-P plating solution, Surface & Coatings Technology 202, 217-21．
　　10．Hu, J．, Yan, M．, Luo, W．, Wu, J．M．(2007): Effects of microstructure on the temperature dependence of relative initial permeability of NiCuZn ferrites, Physica B: Condensed Matter 400, 119-23．
　　11．Yu, L．Q．, Yan, M．, Wu, J．M．, Luo, W．, Cui, X．G．, Ying, H．G．(2007): On the cooling rate of strip cast ingots for sintered NdFeB magnets, Physica B: Condensed Matter 393, 1-5．
　　12．Wu, J．M．* (2007): Photodegradation of rhodamine B in water assisted by titania nanorod thin films subjected to various thermal treatments．Environmental Science & Technology 41, 1723-28．
　　13．Wu, J．M．*, Qi, B．(2007): Low-temperature growth of nitrogen-doped titania nanoflower film and its ability to assist photodegradation of rhodamine B in water．The Journal of Physical Chemistry C 111, 666-673．
　　14．Wu, J．M．*, Qi, B．(2007): Low-temperature growth of monolayer rutile TiO2 nanorod films．Journal of the American Ceramic Society 90, 657-60．
　　15．Wu, J．M．*, Huang B．(2007): Enhanced ability of nanostructured titania film to assist photodegradation of rhodamine B in water through natural ageing．Journal of the American Ceramic Society 90, 283-286．
　　16．Liu, S．G．, Wu, J．M．*, Zhang, S．C．, Rong, S．J．, Li, Z．Z．(2007): High temperature erosion properties of arc-spraying coatings using various cored lines．Wear 262, 555-61．
　　17．Wu, J．M．, Liu, J．F．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2007): Low-temperature deposition of rutile film on biomaterials substrates and its ability to induce apatite deposition in vitro．Journal of Materials Science: Materials in Medicine 18, 1529-36．
　　18．Wu, J．M．*, Huang B．, Wang, M．a(chǎn)nd Osaka A．(2006): Titania nanoflowers with high photocatalytic activity．Journal of the American Ceramic Society 89, 2660-63．
　　19．Wu, J．M．*, Zhang, S．C．, Li, Y．W．, Wang, M．, and Osaka A．(2006): Influence of film thickness on in vitro bioactivity of thin anatase films produced through direct deposition from an aqueous titanium tetrafluoride solution．Surface & Coatings Technology 201, 3181-88．
　　20．Wu, J．M．*, Wang, M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka A．(2006): Crystallization of amorphous titania gel by hot water aging and induction of in vitro apatite formation by crystallized Titania．Surface & Coatings Technology 201, 755-761．
　　21．Zhao, J．M．, Liu, J．F．, Wu, J．M．, Tsuru, K．, Hayakawa, S．a(chǎn)nd Osaka, A．(2006): Apatite formation on rutile and anatase layers derived by hydrolysis of titanylsulfate in a simulated body fluid,” Journal of Ceramic Society of Japan 114, 253-258．
　　22．Wu, J．M．*, Huang B．, Zeng Y．H．(2006): Low-temperature deposition of anatase thin films on titanium substrates and their abilities to photodegrade Rhodamine B in water．Thin Solid Films 497, 292-298．
　　23．Wu, J．M．*, Zhang, T．W．, Zeng, Y．W．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2005): Large-scale preparation of ordered titania nanorods with enhanced photocatalytic activity．Langmuir 21, 6995-7002．
　　24．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2004): Low-temperature preparation of anatase and rutile layers on titanium substrates and their ability to induce in vitro apatite deposition．Journal of the American Ceramic Society 87, 1635-1642．
　　25．Wu, J．M．* (2004): Low-temperature preparation of titania nanorods through direct oxidation of titanium with hydrogen peroxide．Journal of Crystal Growth 269, 347-355．
　　26．Wu, J．M．* and Zhang, T．W．(2004): Photodegradation of Rhodamine B in water assisted by titania films prepared through a novel procedure．Journal of Photochemistry and Photobiology．A: Chemistry 162, 171-177．
　　27．Wu, J．M．, Xiao, F．, Satoshi, H．, Tsuru, K．Takemoto, S．a(chǎn)nd Osaka, A．(2003): Bioactivity of metallic biomaterials with anatase layers deposited in acidic titanium tetrafluoride solution．Journal of Materials Science: Materials in Medicine 14, 1027-1032．
　　28．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2003): Early apatite deposition on titanium treated with hydrogen peroxide, Journal of Australia Ceramic Society 39, 36-42．
　　29．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2002): Nanocrystalline titania made from interactions of titanium with hydrogen peroxide solutions containing tantalum chloride．Crystal Growth & Design 2, 147-149．
　　30．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2002): Soft solution approach to prepare crystalline titania films．Scripta Materialia 46, 705-709．
　　31．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2002): Porous titania films prepared from interactions of titanium with hydrogen peroxide solution．Scripta Materialia 46, 101-106．
　　32．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2002): In vitro bioactivity of anatase film obtained by direct deposition from aqueous titanium tetrafluoride solutions．Thin Solid Films 414, 275-280．
　　33．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2002): Crystallization of anatase from amorphous titania in hot water and in vitro biomineralization．Journal of Ceramic Society of Japan 110, 78-80．
　　34．Wu, J．M．* (2001): Nano-sized amorphous alumina particles obtained by ball milling ZnO and Al powder mixture．Materials Letters 48, 324-330．
　　35．Wu, J．M．*, Zheng, S．L．, Zeng, Y．W．a(chǎn)nd Li, Z．Z．(2001): Dry sliding wear of MA/PM Al-10Ti．Transactions of Nonferrous Metals Society of China 11, 270-274．
　　36．Wu, J．M．*, Zheng, S．L．a(chǎn)nd Li, Z．Z．(2000): Thermal stability and its effects on mechanical properties of rapidly solidified Al-Ti alloys．Materials Science and Engineering A 289, 246-254．
　　37．Wu, J．M．* and Li, Z．Z．(2000): Nanostructured composite obtained by mechanically driven reduction reaction of CuO and Al powder mixture．Journal of Alloys and Compounds 299, 9-16．
　　38．Wu, J．M．* and Li, Z．Z．(2000): Contributions of the particulate reinforcement to dry sliding wear resistance of rapidly solidified Al-Ti alloys．Wear 244, 147-153．
　　39．Wu, J．M．*, Zheng, S．L．, Yuan, J．, Li, Z．Z．, Zeng, Y．W．a(chǎn)nd Ji, Z．G．(2000): Mechanical properties of rapidly solidified Al-Ti alloys after thermal exposure．Transactions of Nonferrous Metals Society of China 10, 435-440．
　　40．Wu, J．M．*, Zheng, S．L．, Li, Z．Z．a(chǎn)nd Wu, N．Q．(1999): Reduction reaction of Al-CuO powder mixture driven by mechanical alloying．Transactions of Nonferrous Metals Society of China 9, 717-722．
　　41．Wu, J．M．*, Zheng, S．L．, Li, Z．Z．a(chǎn)nd Zeng, Y．W．(1999): Effects of cold deformation on the low speed sliding wear of the RS/PM Al-10Ti alloy against carbon steel．Wear 232, 25-30．
　　42．Wu, J．M．*, Wu, N．Q．, Wang, G．X．a(chǎn)nd Li, Z．Z．(1997): In-situ observation of single-point wear of the PM alloy Al-10Ti．Transactions of Nonferrous Metals Society of China 7, 69-74．
　　43．Hu, S．B．, Li, Z．Z．, Mei, Z．a(chǎn)nd Wu, J．M．(2000): High temperature sliding wear behaviors of ion plating TiN composite coating with ion nitriding as interlayer on hot work die steel．Transactions of Nonferrous Metals Society of China 10, 777-782．
　　44．Zheng, S．L．, Wu, J．M．*, Zeng, Y．W．a(chǎn)nd Li, Z．Z．(1999): Ageing behavior of Cu-15Ni-8Sn alloy prepared by mechanical alloying．Transactions of Nonferrous Metals Society of China 9, 707-711．
　　45．Wu, N．Q．, Li, Z．Z．, Wu, J．M．a(chǎn)nd Wang, G．-X．(1998): Mechanosynthesis mechanism of TiC powder．Materials Science & Technology 14, 287-291．
　　46．Wu, N．Q．, Wu, J．M．, Lin, S．, Zhou, J．Q．a(chǎn)nd Li, Z．Z．(1998): Dry sliding wear of PM Al-10Ti alloy．Transactions of Nonferrous Metals Society of China 8, 421-429．
　　47．Wu, N．Q．, Su, L．Z．, Yuan, M．Y．, Wu, J．M．a(chǎn)nd Li, Z．Z．(1998): Nano-sized amorphous Cu-Zr alloy particles prepared by mechanochemical reaction,Materials Science and Engineering A 257, 357-360．
　　48．Wu, N．Q．, Su, L．Z．, Yuan, M．Y．, Liu, Y．Y．, Wu, J．M．a(chǎn)nd Z．Z．Li (1998): Preparation and microstructure of nano-sized Cu particles by mechanochemical reaction, Transactions of Nonferrous Metals Society of China 8, 610-612．
　　49．Wu, N．Q．, Wu, J．M．, Li, Z．Z．a(chǎn)nd Wang, G．-X．(1997): Formation of nanocrystalline f．c．c phase by mechanically driven crystallization．Materials Transactions JIM 38, 255-259．
　　50．Wu, N．Q．, Wu, J．M．, Wang, G．X．a(chǎn)nd Li, Z．Z．(1997): Amorphization in the Al-C system by mechanical alloying．Journal of Alloys and Compounds 260, 121-126．
　　51．Wu, N．Q．, Wang, G．X．, Wu, J．M．a(chǎn)nd Li, Z．Z．(1997): Formation of nanocrystalline TiC by ball milling of elemental titanium and carbon．International Journal of Refractory Metals & Hard Materials 15, 289-293．
　　52．Wu, N．Q．, Wu, J．M．, Li, W．, Wang, G．X．a(chǎn)nd Li, Z．Z．(1997): Preparation of Ti/Al based nanophase composite powder by mechanical alloying．Transactions of Nonferrous Metals Society of China 7, 1-4．
　　53．Wu, N．Q．, Wang, G．X．, Li, Z．Z．, Wu, J．M．a(chǎn)nd Chen, J．W．(1997): Microstructure and sliding wear behavior of PM alloy Al-10Ti after thermal exposure．Wear203-204, 155-161．
　　54．Wu, N．Q．, Wang, G．X．, Li, W．, Wu, J．M．a(chǎn)nd Li, Z．Z．(1997): Mechanically driven synthesis of nanophase TiC/Ti-Al composite powder, Materials Letters32, 259-262．
　　55．Wu, J．M．, Djerdj, I．, Graberg, T．a(chǎn)nd Smarsly, B．* (2012), “Mesoporous MgTa2O6 thin films with enhanced photocatalytic activity: on the interplay between crystallinity and mesostructure,” Beilstein Journal of Nanotechnology 3, 123-33．(open access from website: http://www．beilstein-journals．org/bjnano/home/home．htm)
　　56．Wen, W．, Wu, J．M．* (2012): A novel solution combustion synthesis of cobalt oxide nanoparticles as negative-electrode materials for lithium ion batteries, Journal of Alloys and Compounds 513, 592-96．
　　57．Wen, W．, Wu, J．M．* (2011): Eruption Combustion Synthesis of NiO/Ni Nanocomposites with Enhanced Properties for Dye-Absorption and Lithium Storage, ACS Applied Materials & Interfaces 3, 4112-19．
　　58．Wu, J．M．*, Song, X．M．, Yan, M．* (2011): Alkaline hydrothermal synthesis of homogeneous titania microspheres with urchin-like nanoarchitectures for dye effluent treatments, Journal of Hazardous Materials 194, 338-44．
　　59．Wu, J．M．*, Tang, M．L．(2011): One-pot synthesis of N-F-Cr-doped anatase TiO2 microspheres with nearly all-(001) surface for enhanced solar absorption, Nanoscale 3, 3915-3922．
　　60．Wu, J．M．*, Tang, M．L．(2011): Hydrothermal growth of nanometer- to micrometer-size anatase single crystals with exposed (001) facets and their ability to assist photodegradation of rhodamine B in water, Journal of Hazardous Materials 190, 566-73．
　　61．Wu, J．M．*, Song, X．M．, Ma, L．Y．, Wei, X．D．(2011): Hydrothermal growth of multi-facet anatase spheres, Journal of Crystal Growth 319, 57-63．
　　62．Wu, J．M．*, Wen W．(2010): Catalyzed degradation of Azo dyes under ambient conditions, Environmental Science & Technology 44, 9123-27．
　　63．Song, X．M．, Wu, J．M．*, Yan, M．(2009): Distinct visible-light response of composite films with CdS electrodeposited on TiO2 nanorod and nanotube arrays, Electrochemistry Communications 11, 2203-06．

　　國際會議
　　1．Wu, J．M．, Min WANG, Akiyoshi Osaka．(2007): Bioactive Composite Coating on Titanium Implants for Hard Tissue Repair, The 5th Asian-Australasian Conference on Composite Materials (ACCM-5), Hong Kong, China, November 27-30, Key Engineering Materials 334-335, 1249-52．
　　2．Wu, J．M．, Min WANG, Satoshi Hayakawa, Kanji Tsuru and Akiyoshi Osaka．(2006): In vitro bioactivity of hydrogen peroxide modified titanium: effects of surface morphology and film thickness, 18th International Symposium on Ceramics in Medicine, Kyoto, Jpn, December, 2005, Key Engineering Materials 309-311, 407-410．
　　3．Wu, J．M．, Min WANG, Satoshi Hayakawa, Kanji Tsuru and Akiyoshi Osaka．(2006): Direct deposition of a rutile layer on polymer substrates to induce bioactivity in vitro, 18th International Symposium on Ceramics in Medicine, Kyoto, Jpn, December, 2005, Key Engineering Materials 309-311, 419-422．
　　4．Wu, J．M．, Wang, M．, and Osaka, A．(2005): Biomimetic deposition of apatite on titania films prepared through various approaches, The 3rd International Symposium on Apatite and Correlative Biomaterials, Wuhan, China, October 25-28, 2005, p92．
　　5．Wu, J．M．, Wang, M．, and Osaka, A．(2005): Biomimetic apatite formation on titania films produced via a low-temperature Route, 2005 International Symposium on Quality of Bone and Scaffold Biomaterials, Hong Kong, China, October 17-18, 2005, p164．
　　6．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2003): Low temperature deposition of bioactive crystalline titania films: Effects of tantalum．15th International Symposium on Ceramics in Medicine, Sydney, Australia, December 4-8, 2002, Key Engineering Materials 240-242, 533-536．
　　7．Wu, J．M．, Satoshi, H．, Tsuru, K．a(chǎn)nd Osaka, A．(2002): Preparation of anatase and rutile layers on titanium substrates in aqueous solution and their tissue-bonding ability, The 104th Annual Meeting and Exposition on the American Ceramics Society, St．Louis, Missouri, Apr 22-May 1, 2002．
　　8．Wu, J．M．, Satoshi, H．, Tsuru, K．, Osaka, A．a(chǎn)nd Wang, X．X．(2001): In vitro evaluation on bone-bonding of chemically modified titanium, 14th International Symposium on Ceramics in Medicine, Hawaii, USA, December, 2001, Key Engineering Materials 218-220,141-144．
　　9．Wu, J．M．(2001): In vitro apatite deposition on chemically modified titanium．14th fall meeting of the ceramics society of Japan celebrating 21st century．Memorial Symposium on Ceramics by Young Asian Fellows, sponsored by Basic Science Division, Ceramic Society of Japan, Tokyo, Sep 26-28, 2001, p177．
　　
　　中文論文
　　1．周濤，劉少光，唐名早，陳成武，徐玉松，吳進明*，選擇性催化還原脫硝催化劑研究進展，硅酸鹽學報，37（2），（2009）317-324．
　　2．張高潔，吳進明*，黃兵，劉少光，嚴密，納米TiO2薄膜的自然時效，浙江大學學報（工學版），42（7），（2008）1266-70．
　　3．劉少光，吳進明*，張升才，胡小海，榮淑杰，李志章，氮氣保護對納米復合涂層組織與性能的影響，浙江大學學報（工學版），42（3），（2008）494-97．
　　4．劉少光，趙琪，李志章，酈劍，張升才，吳進明，胡小海，N2保護對TiAl3和Cr3C2復合涂層組織結構及高溫沖蝕性能的影響，功能材料，39（1），（2008），166-169．
　　5．周濤，劉少光，吳進明，陳成武，徐玉松，火電廠氮氧化物排放控制技術，環境工程，26（6），（2008），82-85．
　　6．張高潔，吳進明*，劉少光，嚴密，納米復合結構二氧化鈦薄膜的制備及其光催化降解水中若丹明B的能力，硅酸鹽學報，35（4），（2007）442-46．
　　7．應華根，吳進明，羅偉，嚴密，無熱處理高硬度高耐磨性化學鍍鎳磷合金，浙江大學學報（工學版），41（8），（2007）1356-1360．
　　8．吳磊，嚴密，應華根，吳進明，羅偉，NdFeB磁體表面化學鍍Ni-P合金防腐研究，稀有金屬材料與工程，36（8），（2007）1398-1402．
　　9．夏華，嚴密，王晨，吳進明，羅偉，Nd與Co對Nd2Fe14B/α-Fe磁體溫度穩定性影響，浙江大學學報（工學版），41（3），（2007）529-532．
　　10．吳磊，應華根，吳進明，羅偉，嚴密，NdFeB磁體表面化學鍍Ni-Co-P合金及其耐腐蝕性能研究，材料工程，(z1），（2006）202-206．
　　11．劉少光，吳進明*，張升才，榮淑杰，胡小海，李志章，退火處理對含納米陶瓷粉電弧噴涂層組織結構與高溫沖蝕性能的影響，功能材料，37（12），（2006），2023-26．12．劉少光，吳進明*，張升才，榮淑杰，胡小海，李志章，超臨界鍋爐管道耐磨涂層的微觀組織結構及沖蝕規律，動力工程，26（6），（2006），908-12．
　　13．張升才，吳進明*，尾坂明義，鈦金屬低溫生物活化，材料科學與工程學報， 23(1)，2005， 71-74．
　　14．吳進明*，都留寛治，早川 聡，尾坂明義，鈦金屬表面生物陶瓷涂層研究的現狀，硅酸鹽學報，31（7），（2003）692-697．
　　15．吳進明*，李志章，20鋼鍋爐鋼管的斷裂及腐蝕穿孔失效，金屬熱處理，（5），（2000）29．
　　16．吳進明*，李志章，葉仲屏，快速凝固Al-Ti合金的再結晶，材料科學與工程，18（1），（2000）36．
　　17．吳進明*，鄭史烈，李志章，曾躍武，冷變形對低滑動速率下Al-10Ti合金磨損的影響，摩擦學學報，19（4），（1999）342-347．
　　18．吳進明*，鄭史烈，李志章，曾躍武，第二相顆粒對快速凝固Al-Ti合金滑動磨損性能的影響，摩擦學學報，18（4），（1998）289-294．
　　19．吳進明*，鄭史烈，李志章，顆粒增強鋁基原位復合材料，材料導報，13（5），（1999）52-54．
　　20．吳進明*，鄭史烈，李志章，吳年強，CuO-Al系的機械驅動還原反應，中國有色金屬學報，8（suppl．2），（1998）11．
　　21．吳進明*，李志章，葉仲屏，球磨時間對Al-8Ti合金組織的影響，材料科學與工程，16（2），（1998）72．
　　22．吳進明*，吳年強，李志章，曾躍武，Al-12．5Ti混合粉的機械合金化，浙江大學學報（自然科學版），31(5), (1997), 614-621．
　　23．吳進明*，張升才，李志章，吳年強，陳豐土，氣門鎖夾槽的斷裂失效分析，金屬熱處理，（4），（1997）34-36．
　　24．吳進明*，吳年強，曾躍武，李志章，黃海東，機械合金化Al-8Ti合金粉的燒結成型研究，金屬熱處理，（12），（1997）3．
　　25．鄭史烈，吳進明*，吳年強，曾躍武，李志章，機械合金化Cu-15Ni-8Sn合金的制備，功能材料，增刊，(1998) 849．
　　26．吳年強，吳進明，李志章，王廣欣，曾躍武，機械合金化制備納米晶過飽和固溶體Al(Ti,C),中國有色金屬學報，增刊2，（1996）293．
　　27．吳年強，林碩，葉仲屏，吳進明，李志章，機械合金化中的固態反應，材料導報，13（6），（1999）52-54．
　　28．曾躍武，鄭史烈，陳津文，吳進明，李志章，Cu-15Ni-8Sn合金的機械合金化，中國有色金屬學報，9（suppl．1）（1999）16．

　　“如果發現導師信息存在錯誤或者偏差，歡迎隨時與我們聯系，以便進行更新完善。”

添加浙江大學學姐微信，或微信搜索公眾號“考研派小站”，關注[考研派小站]微信公眾號，在考研派小站微信號輸入[浙江大學考研分?jǐn)?shù)線、浙江大學報錄比、浙江大學考研群、浙江大學學姐微信、浙江大學考研真題、浙江大學專業目錄、浙江大學排名、浙江大學保研、浙江大學公眾號、浙江大學研究生招生）]即可在手機上查看相對應浙江大學考研信息或資源。

浙江大學